Description
Features:
- Support one-door
- Can be used as a stand alone keypad
- Full programming from the keypad
- 2000 users, supports Card, PIN, Card + PIN
- Doesn’t need to connect on the computer, can works alone
- It’s widely used in high-end building, residential communities and other public places.
Access Control Keypad:
- Card Type: EM or EM compatible card
- Frequency: 125Khz
- Read Speed: <0.1s
- Reading Range: Ma.x. 6cm
- Input Voltage: 12VDC
- Standby Current: <30mA
- Material of Shell: Plastic
- Door Relay Time: 0-99S (Adjustable)
Power Supply:
- Input Voltage: AC 110-240V (Worldwide voltage)
- Input Frequency: 50-60Hz
- Output Voltage: DC12V/3A
- Adjustable Locking Delay: 0~15 sec
- Dimensions: 4.72×3.74×1.50 in / 120x95x38mm
Keyfobs:
- Operation Frequency: 125KHz
- Reading distance: 3-10cm / 1.18-3.94in
- Each keyfob has an unique ID number
Remote Control:
- This kit come with a remote which can open door remote
- Fixed code, and it can be easily programmed
- Number of Key: 1
- Operating Type: Momentary / Toggle
- Default setting is Momentary
- Remote Operating Frequency : 433MHz
- Case Material: PC+ABS
- Transmitter Working Voltage: 6VDC (Built-in 2pcs CR2016/3V button battery)
- Service Life of the Battery: 50000 cycles tested
- Dimension (LxWxH): approx. 58x33x12mm / 2-9/32″ x 1-19/64″ x 15/32″
Wiring of Remote Control:
- Remote box wired with power supply
- Clear Code: Press and hold the learning key for 8 seconds, until the LED3 light turn off, indicating the clear code is successful.
- Pairing Transmitter and Receiver: Press the learning key once, LED3 light flash one time, then press the button A on the transmitter, the red light flash 3 times, indication paring is success